[ad_1]

In the conditions of a private house, backyard or summer cottage, there is often a need to equip paths, pour the foundation for capital buildings. To make the coating as dense and durable as possible, use a special tool. Just a couple of decades ago, ordinary manual rammers were used for this purpose — working with them takes a lot of time and requires a decent amount of effort. Not so long ago, original equipment appeared in specialized stores — vibrating plates.

It is a special construction tool designed to perform tamping work. The devices are able to work with gravel, crushed stone, sand, concrete and even asphalt. Not every owner of a house or cottage knows how to approach the purchase of this equipment correctly. We decided to fill this gap and made a rating of the best vibrating plates of the year. Here are collected the most popular devices among users, their detailed performance characteristics are given. In addition, the article describes in detail the rules for selecting the device.

How to choose the right vibrating plate in 2022?

The technique has a fairly simple design. The main element is a plate made of cast iron or steel, a vibrator is installed in its central part. The vibrations from it pass to the plate itself, with vibrating movements it rams the surface on which it is located. The key moving part of the structure is the motor that drives the vibrating element. Motors are diesel, gasoline or electric.

For home purposes, as a rule, they buy gasoline or electric devices. The latter will cost much less, she will have to additionally purchase an extension cord, make sure that the electrical wiring at home can withstand the load from this device. Gasoline vibrating plates are autonomous, have increased power compared to electrical appliances. Diesel designs are usually purchased for industrial production. They are very expensive, but they consume little fuel, they can easily endure even extremely low temperatures.

The mass of the apparatus also plays an important role — the quality of the seal directly depends on this indicator. By weight, all vibratory plates are classified into 4 groups: light ones weigh up to 75 kg, the mass of universal ones is in the range from 80 to 110 kg, medium-heavy — from 140 to 220 kg, there are also heavy devices — their weight is over 250 kg. Pay attention to the power of the motor, which affects the ease of work. The lower the power, the more force will need to be applied during tamping.

When we chose products to be included in the ranking of the best vibrating plates, we took into account all the factors discussed above, but there were a number of other points — value for money, as well as user reviews. We have tried to compile a review of not too expensive models that will be affordable for most of our readers.

Appliances powered by electricity

5. Vibromash VI-99 V

Vibromash VI-99 V photo

Ideal for the home crafter. Many users claim that there is no need to buy a tool in a complete set and assembly. It is quite possible to assemble it with your own hands, moreover, for these purposes you do not have to have engineering knowledge in the field of electricity and technology. The key part of the apparatus is the presented vibration motor.

It has two closed-type eccentrics on its sides, which are attached to the central shaft. When the latter begins to rotate, the eccentrics shift their center of gravity, due to which vibration occurs. It is quite enough to take this electric motor, install it on a cast iron or metal base, then attach the handle, and you can get to work.

Advantages:

  • Sufficiently reliable electric motor that can last a long time;
  • High quality workmanship and assembly;
  • Unpretentious in work and maintenance.

Disadvantages:

  • Almost all elements will have to be made and installed by hand, fortunately, there is nothing particularly complicated in this work.

Vibrating plate Vibromash VI-99 V

4. StroyMashService IE-4509 A

StroyMashService IE-4509 A photo

I would like to first say that the presence of an electric drive imposes certain restrictions on equipment of this type. In particular, the electric vibrating plate is characterized by low power, it needs a constant connection to the network. With the help of this tool, it is possible to compact soil of medium flowability to a depth of about 15-20 cm. At the same time, the power of the electric motor is low — the device consumes only 250 watts. This allows you to connect it even to worn out wiring without having to pay too high electricity bills.

The design of the device is very simple, there is only one relatively complex element: the flexible coupling of the handle with the plate itself. The device is equipped with a steel plate with a thickness of 2 mm. This is quite enough so that the foundation does not warp for a long time.

Advantages:

  • Acceptable cost;
  • Insignificant power of the equipment;
  • The minimum amount of electricity consumed;
  • The design is elementary — there are practically no complex nodes, therefore, if necessary, the device can be repaired on its own;
  • The device can compact loose soil to a depth of 15-20 cm.

Disadvantages:

  • The insignificant mass of the device requires that additional efforts will need to be applied to it;
  • Small thickness steel vibrating plate.

Vibrating plate StroyMashService IE-4509 A

3. SHATAL PC-1443

SHATAL PC-1443 photo

In third place in this part of the review of the best electric vibrating plates is a very high-quality Chinese-made model. The company produces both electric and gasoline and diesel equipment options, and in terms of overall dimensions, these products practically do not differ from each other. According to the developers, an original vibration reduction system is installed here. The compaction speed is very high — on sand it can reach 25 m per minute. The maximum force of the device is 13.5 kN, the power of the electric motor is 3 horsepower.

The case is high-quality, reliable, there are no complaints about the assembly of the device. Unfortunately, the device is quite expensive, so it is unlikely that every owner of a private house can afford such an acquisition.

Advantages:

  • Availability of a unique vibration reduction system;
  • High speed of work;
  • Decent engine power;
  • Good build quality.

Disadvantages:

  • It is very expensive;
  • Short supply cable — it is unlikely to do without an extension cord.

Vibrating plate SHATAL PC-1443

2. RED LIGHTHOUSE VU-05-45

RED LIGHTHOUSE VU-05-45 photo

It has compact dimensions, domestic production equipment, can be used even for professional work. In particular, the vibrating plate is also suitable for laying the roadway, where the load on the equipment is the highest. However, the manufacturer claims in the instructions for this device that it is best suited for a private house and summer cottage. The tool copes well with any loose soil, as well as sand or fine gravel. The material will be compacted to a depth of 15 cm.

The power of the electric motor is 0.5 horsepower, it consumes little electricity, so the device can be powered through the most ordinary household outlet. The length of the power cable is short — it is only 2 meters.

Advantages:

  • It is quite suitable for both individual construction and professional work;
  • Copes well with any bulk materials;
  • Connects to the network through a regular outlet;
  • Consumes a minimum of electricity.

Disadvantages:

  • For its capabilities, the device is expensive;
  • Short cable length.

Vibrating plate RED LIGHTHOUSE VU-05-45

1. Vibromash VU-05-45 220V

Vibromash VU-05-45 220V photo

Another device of domestic manufacture. It is equipped with an electric motor with a power of 0.5 kW — this makes it optimally suited for domestic work and individual construction. In principle, you can find the same model, only with a kilowatt engine. Regardless of the modification, the device is connected to a household electrical outlet. The tamping depth is quite decent — on especially loose soils it can reach 30 cm.

Sand and fine gravel are compacted almost instantly, but with asphalt or asphalt crumbs, you will have to decently tinker. According to the manufacturer, such a device is perfect even for professional road work. The bed is made of rather thick metal, so when using the device you will not have to make serious efforts.

Advantages:

  • Acceptable cost;
  • Long service life;
  • It is possible to buy a modification with a more powerful motor;
  • Quite a long power cable;
  • Can be used for professional purposes.

Disadvantages:

  • When working for a long time without interruption, the vibrating plate motor may overheat, but there is a corresponding system of protection against breakdowns.

Vibrating plate Vibromash VU-05-45 220V

Petrol units

5. MASTERPAC PC 5018

MASTERPAC PC 5018 photo

The Chinese-made device is of the highest quality and low fuel consumption, although the technical characteristics are very high. The rated power of this vibratory plate is 5.4 horsepower, which is significantly more than any electric model. The impact force during operation is 18 kN. With the help of this indicator, it is possible to compact the soil to a depth of 20 cm.

The handle is rather weak: it is made of stainless steel, but the walls of the tubes are rather thin. It does not provide any controls. It is most convenient to work with this tool in a summer cottage. In principle, it is theoretically possible to use the structure for tamping large gravel and asphalt, but these processes will take a lot of time and effort.

Advantages:

  • Autonomous work;
  • Low fuel consumption;
  • Effectively showed his useful qualities in summer cottages;
  • The soil can be compacted to a depth of 20 cm.

Disadvantages:

  • The handle of the device is rather weak, it must be handled as carefully as possible;
  • It has no controls.

Vibrating plate MASTERPAC PC 5018

4.CHAMPION PC6337F

CHAMPION PC6337F photo

One of the cheapest standalone tools of this type. The equipment was developed by Chinese engineers and is produced at the enterprises of the same country. The device will be very useful for people who want to equip paths from any materials in their summer cottage. The working area of ​​​​the base is small, but this is done not so much to save metal, but to make it as convenient as possible to work with the tool. With a vibrating plate, it will be possible to easily climb even into hard-to-reach places, to arrange areas of complex shape, for example, with turns.

Such a device is able to cope even with asphalt surfaces. The power of the equipment is 5.5 horsepower. The productivity of the tool is at a very high level — up to 500 square meters can be processed in one shift.

Advantages:

  • Good tool performance;
  • Decent power of the vibrating element;
  • A small working platform allows you to work even in confined spaces;
  • Acceptable cost.

Disadvantages:

  • Weak chain — it will have to be tightened with enviable regularity.

Vibratory plate CHAMPION PC6337F

3. WACKER NEUSON VP 1550AW

WACKER NEUSON VP 1550AW photo

It is characterized by a reliable and durable engine. He is able to work without interruption for quite a long time. The motor is manufactured by the world famous Honda company. The build is just superb. The housing perfectly protects the internal parts of the vibrating plate from atmospheric moisture. The control handle, if necessary, can be adjusted in height — this allows you to work with the device as comfortably as possible. Engine power is 5.5 horsepower.

Users in their reviews claim that the motor almost never fails. If you regularly maintain the engine, it will last for several decades. The working platform is also small, which makes the tool very maneuverable — it is convenient to use it in small areas.

Advantages:

  • Reliable engine — can last for several decades;
  • The case is qualitatively protected from moisture;
  • Decent power of the device;
  • The handle is height adjustable.

Disadvantages:

  • For a household tool, it is quite expensive.

Vibrating plate WACKER NEUSON VP 1550AW

2. ZITREK CNP 330-A2

ZITREK CNP 330-A2 photo

Today, products from this well-known Czech manufacturer are considered one of the best in the world, although they are quite expensive. The build quality is really excellent, the engineers have carefully thought out its configuration when developing this device. This gasoline stove runs on AI-92 fuel and is able to easily withstand even fairly high loads. In general, according to users, this model should be attributed to a professional tool. For a suburban area, the device will be overly powerful, as it is best suited for asphalt surfaces.

The maximum depth of compaction of the material is 90 cm. The power of the engine installed here is as much as 6.5 horsepower, the highest impact force reaches 38 kN. In just one hour of operation, the device is able to process up to 650 square meters of base.

Advantages:

  • Very high power of the device;
  • Suitable for professional purposes;
  • Decent base compaction depth;
  • Significant speed of work;
  • Increased motor power and increased impact energy.

Disadvantages:

  • High price;
  • Consumes a lot of fuel — up to three liters of gasoline per hour.

Vibrating plate ZITREK CNP 330-A2

1.TSS-WP160L

TSS-WP160L photo

This technique is characterized by an expensive price, but it has increased functionality, which allows us to talk about the optimal ratio of price and quality. This device belongs to the group of professional equipment. The power of the gasoline engine is 4.8 kilowatts. The maximum compaction depth can reach 50 cm. In just one hour, the equipment can process up to 570 square meters of any type of surface.

The size of the working base is not too large — only 78×48 cm. The impact power of the tool is 30.5 kN. Such a constructive solution allows to significantly increase the productivity of the apparatus. In addition, users note the highest reliability of this equipment. The plate is durable and resistant to abrasion. All elements, except for the engine, are domestically produced, so replacing a failed part will not be the slightest problem.

Advantages:

  • The optimum ratio of price and quality;
  • The plate is capable of compacting the soil to a depth of 50 cm;
  • Significant impact power;
  • The small size of the working basis does the device very maneuverable.

Disadvantages:

  • Nevertheless, the cost of the device is high;
  • Finding engine parts is not easy.

Vibrating plate TSS-WP160L

In conclusion, a useful video

Our review of the best plate compactors has come to an end. We hope that the data we collected was enough for you to decide on the purchase of the most suitable device for specific purposes in 2022. If you have any questions, you can always ask us in the comments to this article.

[ad_2]

От Yraa

Добавить комментарий