Electric saws are a very necessary and useful tool, which is almost indispensable for owners of summer cottages and private houses. Although this equipment has less autonomy compared to gasoline units, it will be very useful when performing small-scale sawmill work. Such products are easy to use, they do not require special maintenance: it is enough to plug the tool into the socket and start on the corresponding button, after which you can start working.
The stores offer a wide range of electric saws, it will not be too easy to choose the best product among those available on the market. To make this problem easier for you, we decided to rank the best power saws of the year. However, before that, let’s look at the most important characteristics of such equipment, so that you understand what to look for when choosing a product.
What indicators of power saws are the most important?
Any electric saw includes the main structural details: an engine placed under a plastic or metal case, guides, the chain itself and a pump with an oil supply reservoir. When the product is turned on, the motor transmits torque to the sprocket using a special bevel gear or even through a direct drive. In the most modern models, manufacturers install a centrifugal clutch system. They allow you to reliably protect the electric motor and gearbox from breakdowns.
The chain oil is in a container, it is pumped to the tire with a pump, after which it is evenly distributed over all the internal elements of the product. Many designs are equipped with a system for adjusting the amount of lubrication. Thanks to this, it is possible to cut materials with different hardness. The volume of the oil tank is on average about 150-200 ml — this amount will be quite enough for full and continuous operation for two hours. It is very important to keep track of the remaining amount. An electric motor that runs dry will quickly overheat and eventually fail. Transparent inserts are usually placed on the tank body so that you can quickly check the remaining amount of oil.
Like any other models of power tools for the home, saws of this type are presented on the market with household and professional designs. The latter have increased power, so they can be used without interruption for much longer. Household products are not designed for continuous continuous operation — approximately every 10-15 minutes they will have to be allowed to rest so that the engine has time to cool down a little.
When choosing, be sure to pay attention to the power of the engine. This will affect not only the performance of the structure, but also its durability. If the mains voltage is not stable, professionals recommend giving preference to products equipped with a thermal control system that will automatically turn off the equipment when a certain engine temperature is reached.
In the manufacture of power saws, low-profile chains are usually used. Their performance is average, but they practically do not vibrate during operation, so the hands will get tired much less. This improves the usability of the tool. Another key parameter is the length of the bar on which the chain is attached. Its length can be in the range from 30 to 45 cm. The model with a length of 40 cm is optimal for domestic conditions. Tools with a longer tire length will significantly increase their weight, and they will cost much more. The quality of the cut directly depends on how thick the chain is. It is very important to check that the design is equipped with a soft start system and an inertial brake, the latter being able to stop all the moving elements of the product within just a few seconds. On sale you can find not only network saws, but also battery-powered units — these devices are quite convenient, they are distinguished by excellent autonomy.
Safety parameters are also very important, it is desirable that the product be equipped with a locking system against accidental activation. In developing our rating of the best power saws of the year, we took into account not only these factors, but also relied on feedback from users and professionals. In addition, we took into account the ratio of price and quality of equipment, so our rating did not include very expensive designs. We hope that after a careful study of the article, you will be able to choose the best model for yourself. Now it is time to proceed to a direct analysis of the characteristics of the model available for sale.
Network saws of the middle price segment
4. Bosch AKE40S
The product was developed by German engineers, and is produced in factories in Hungary. The engine is very powerful. The chain is made of high quality materials, which ensures a long service life. The oil reservoir is located quite conveniently, the lid goes onto the body, it is not unscrewed too tight, so the consumables can be replenished at any convenient time. The remaining oil level is checked using a special indicator. All moving parts are lubricated in a fully automatic mode, which can significantly increase the life of this product, including chains, since a new chain will be quite expensive.
The equipment is equipped with the SDS chain tensioning system, which greatly simplifies the use of this saw, because there will be no need to purchase a special tool to install or tighten the element. The design includes an automatic brake. This feature allows you to timely stop the rotation of the blade in case there is a possibility of a kickback. The chain stops within a few tenths of a second. This element fully complies with all existing safety requirements for such tools. The engine power is about 1.8 W, the assembly of the device is very reliable, no squeaks and backlashes are observed.
Advantages:
- High level of product reliability;
- There is a convenient protection system that always works in a timely manner;
- Ergonomic handle — it is comfortable to hold such a saw in your hands;
- The vibration is not very strong — the same can be said about the noise.
Disadvantages:
- Not too long power cable, you have to use an extension cord.
Bosch AKE40S
3. PARTNER P820T
This product comes with a 40 cm bar and a chain that is only 1.3 mm thick. Thanks to these elements, it is possible to ensure a very long work with the tool without interruption. The saw operates on the basis of an ordinary electrical network with a voltage of 220 V, so the device can be used in any garden plots where electricity is supplied. The mass of the structure is small, so it is easy to manage and transport from one place to another. This is a Swiss-made model, and the brand has long been able to establish itself as a manufacturer of the highest quality products. This equipment belongs to the household class, respectively, it will not be possible to use it in the process of logging or during large-scale construction.
The product is energy efficient and will not require any specialized skills from the user. Even people with a low level of physical fitness can use this device. The brake here is inertial, the sawing surface, in fact, will stop itself. The engine power here is 2 kW — quite enough for a household tool. The product is placed in an ergonomic case made of chrome-plated steel. Users in their reviews note the convenience of using such equipment due to special and very comfortable handles. A soft start system is provided. The product will retain its attractive appearance even after prolonged use. Weight is only 3 kg.
Advantages:
- Exhaust gases are completely absent;
- It is possible to use this equipment indoors;
- Reliable protection system;
- High chain speed;
- The cut is perfectly even;
- The oil tank has a special viewing window to control its level.
Disadvantages:
- Medium power will not allow you to work with large volumes of materials.
PARTNER P820T
2. Hammer CPP 2200 C
The model is distinguished by not too high cost and increased engine power, which is about 2.2 kW. The mass of the product is 5.7 kg, and the power unit is installed transversely under the body. The device has a start button lock system, so it will not be possible to accidentally start it. The design provides a special chain tension regulator, which allows you to adjust this parameter. The tank is decent — it lasts for about 3-3.5 hours of continuous use. The chain is equipped with 53 teeth, it is put on the guide with a length of 14 inches. The device comes with spare motor brushes, a special casing that will protect the tire and the chain itself from defects during operation.
The case is reinforced, made of high-quality fiberglass, well withstands significant physical exertion and retains its presentable appearance for a long time. The motor is installed longitudinally, there is a high-quality control electronics system that keeps speed and load under control during saw operation, ensuring economical power consumption and preventing rapid wear of moving parts.
Advantages:
- It works quite quietly, vibration is practically not felt;
- Cuts wood perfectly
- Hands do not get tired;
- The chain does not get stuck during operation.
Disadvantages:
- A bit heavy.
Hammer CPP 2200 C
1. Makita UC4030A
Belongs to the class of semi-professional instruments. It is characterized by a quite decent appearance, is made from high-quality composite parts, has a high level of reliability and stability. It is convenient and comfortable to hold it in your hands, the body is balanced just perfectly. Both handles are covered with rubberized materials, so the saw will not slip in your hands, making it safe to use. It is quite comfortable to work with this device, especially since it has a small mass — only about 4.5 kg. The unit is equipped with double protection, an emergency chain brake system is provided, it will not be possible to accidentally start it thanks to a special lock.
Before using the device, it is necessary to install and carefully tension the chain — for this you do not have to use tools, everything you need is on the protective cover. The oil reservoir is equipped with a level to control the remaining amount. The chain is of high quality, made in Canada. It has a long service life, which can be extended if properly cared for. When the chain becomes dull over time, it is sharpened with an ordinary file.
Advantages:
- Good reliability;
- Convenient to use;
- Sophisticated security system.
Disadvantages:
- Small cord length.
Makita UC4030A
Low cost electric chain saws
3. PARMA-M6
Not too powerful device — it has a 1 kW motor. The saw itself, a tire with a casing, and an oil reservoir are supplied with the device. Assembling such a saw is quite easy — everything is clear on an intuitive level. The only thing that can be a problem is chain tension. A special key is supplied with the device, which is used specifically for these purposes. By itself, the chain is placed and tensioned quickly enough, especially if there is some experience in this matter. The main gear, through which the torque will be transmitted directly to the chain, is made of high-quality metal, which is not subject to corrosion processes and does not deform under significant physical stress.
The mouth of the reservoir for the tank is located on top of the device and is closed with a special plastic cover. For safety, the product has a protection system against accidental activation. The engine is located at right angles to the tire. This design solution makes this design quite compact. The power cable is short, so you will probably need to use an extension cord. Due to its compact size, the device can also be used in hard-to-reach places, for example, at a considerable height from the ground. The saw is light and compact.
Advantages:
- Lightweight and compact design;
- Copes pretty well with both thick and thin bars or boards;
- Excellent price;
- Acceptable cost.
Disadvantages:
- Due to the small mass during operation, it may begin to rattle.
PARMA-M6
2. STAVR PCE-40/200
This is a model from a domestic manufacturer that has been developing, manufacturing and selling power tools for quite a long time — over 20 years. All products belong to the middle price segment. Despite the fact that the company is Russian, all the main production facilities of the enterprise are located in China. The design is equipped with a two-kilowatt motor, the tire length is 400 mm, it is possible to achieve a saw rotation speed of about 12 meters per second. Thanks to these characteristics, it is possible to perform filing of trees and shrubs, work with lumber, green hedges, and it can also be used for a number of other household needs. The design is equipped with a keyless chain tensioning mechanism, a special lock is provided for the extension cord.
The safety of the user is ensured by the installation of an electronic brake system that works in 0.15 s, like most other similar models, this design has a system of blocking from accidental start. When the device is started for the first time, you must first arrange a test run — it will make sure that the device is fully operational. The degree of chain tension can be adjusted directly during operation, however, it will be necessary to allow the saw to cool down for some time. An OREGON saw set is installed on the saw, which is able to function normally for quite a long time, and it does not have to be sharpened. The warranty period is quite long — it is 2 years.
Advantages:
- Reliable security system;
- High quality bar and chain;
- Extended warranty period.
Disadvantages:
- The cable could be longer.
STAVR PCE-40/200
1. Storm! CC9922
This is a fairly powerful, but at the same time relatively lightweight design: with an electric motor power of 2.2 kW, it weighs about 5 kg. The model belongs to professional equipment — it can be used not only at home or in a summer cottage, but also in construction, in particular when erecting or dismantling wood structures. This equipment has managed to prove itself excellently in cutting down large trees, as well as in the dissolution of sawn timber, the thickness of which is over 40 cm. Safety is ensured not only by the presence of an inertial brake, but also by a system of protection against accidental start, a special safety shield is also provided.
As users note in their reviews, the product does not require anything supernatural in terms of maintenance: the owner only needs to check the oil level in the tank, as well as the degree of chain tension. The body has excellent ergonomics, so you can cut at any angle. To ensure that the angle is maintained as accurately as possible, there is a tooth stop. The saw comes with a chain and bar from OREGON. The design is excellent for long and intensive use.
Advantages:
- Good power level
- You can work for a long time without stopping;
- Ergonomic body — allows you to get even in hard-to-reach places.
Disadvantages:
- Not detected.
Storm! CC9922
Inexpensive cordless electric saws
3.Greenworks G24CS250
Easy to use and very comfortable design, which, despite the available batteries, is notable for its low weight. Overall dimensions are compact, so it can be transported even in the trunk of a car or carried in a backpack. It is a great choice for a summer resident: it is perfect for trimming thick shrubs, knots, and preparing firewood. The bar is made of durable high-strength silicon steel and is 25 cm long. The blade locking system has a keyless design, so you do not need to resort to using a tool to tension the chain. The handle is rubberized, has an ergonomic shape — it fits well in the palm of your hand and does not slip out of it. Parts lubrication systems automatic.
The product is characterized by high performance in terms of environmental friendliness — there are no exhaust gases, there is not too much noise and vibration. Getting started with the device is very simple: all you need to do is press the appropriate button. The battery life of the product reaches 1 hour. There is protection against accidental start, as well as a shield that will protect your hands from cuts.
Advantages:
- Small overall dimensions;
- Long battery life;
- Ergonomic rubberized handle;
- The oil reservoir is transparent — it is easy to control its level;
- Long term warranty service, which is 2 years;
- There is a shield to protect the hands.
Disadvantages:
- The power button cannot be locked in the «On» position.
Greenworks G24CS25 0
2. Makita DUC353Z
This design is able to compete very successfully with gasoline tools, largely due to the fact that it has a fairly decent battery life. The product has a 35-volt motor that runs on two batteries, the voltage of each of which is 18 V. The design is equipped with a brushless motor, which this manufacturer equips many of its products. Such a motor provides an increased speed of rotation of the chain. This reduces vibration and increases sawing speed. The blade moves in the cut quite smoothly. The case is elongated, well balanced, it is comfortable to hold it in hands. The chain is tensioned without the use of additional mechanisms, so if necessary, it can be replaced in a matter of minutes.
The chain moves at a speed of 20 meters per second, the capacity of the oil filling tank is about 0.2 liters, and its presence is very easy to control. The mass of the product is small — it is 4.6 kg. In addition, this electric saw has an automatic inertia-type working surface brake. With this unit, you can even work with fairly decent volumes. All moving parts are reliably protected from splashes of water or dust, which has a positive effect on the life of the device. The elements will be lubricated depending on the hardness of the material being cut.
Advantages:
- Long service life;
- High power brushless motor;
- Long battery life;
- Reliability of all elements;
- Works well even with large volumes.
Disadvantages:
Makita DUC353Z
1. Husqvarna 436 Li
This is one of the best cordless electric saws of the year. This tool was developed specifically for working with trees of small diameter, it can process shrubs. Also, the saw is used for cutting firewood and various other garden work. The saw is powered by two lithium-ion batteries, which in total give out a voltage of 36 V. They are charged for 50 minutes, the battery life is 45 minutes. The engine is very powerful — it is able to provide good speed. The saw has a small mass, it has comfortable handles with rubberized surfaces, which increase the usability of the product. The saw has a high-quality anti-vibration system. It keeps vibration to a minimum. With a minimum vibration indicator, it is very convenient to work.
The case is made of reliable materials of increased durability. It is carefully protected from the occurrence of various damages, and with its help it is possible to reliably protect the internal elements from the penetration of dust and moisture. The maximum length of the chain is 35 cm, the pitch of the teeth is 3/8 inch. The oil tank capacity is 0.2L. It is supplied to the moving parts using a special pump. An excellent addition is the inertial brake, which will easily protect the user from injury.
Advantages:
- High quality chain;
- Ease of use;
- Insignificant weight of the device;
- Compact overall dimensions;
- Brushless motor;
- Works pretty quietly;
- Batteries charge fairly quickly.
Disadvantages:
- High price.
Husqvarna 436 Li
In conclusion, a useful video
Well, our review of the best power saws has ended. We tried to tell as much as possible about each model and collect as much information as possible about their useful qualities. If you still have any questions, you can ask us in the comments to this article. We will promptly respond to them and provide additional information.