Today, many people are of the opinion that it is much easier to buy a new pair of shoes than to repair one that is out of order. This is largely due to the time spent — you need to take the shoes to the workshop, wash them first, wait a few days, pay money, and so on. However, certain minor repairs can be made on your own — for this you need high-quality glue for shoes.
In hardware stores, the choice of such products is very wide. There are universal, frost-resistant, water-repellent and other compounds. It is quite easy to get confused in the diversity presented. We wanted to help you understand this issue and made a ranking of the best adhesives for shoes in 2022. Here you will learn in detail about the useful characteristics of the most popular products among users. In addition, we took the liberty of giving our readers some useful advice regarding the correct choice of composition, so that it holds the glued elements well, preventing the gap from recurring.
How to choose the right adhesive for shoes?
As mentioned a little earlier, these products come in a variety of types. If, after gluing, the parts are not tightly connected, it means that the glue was chosen incorrectly. In any case, before purchasing, you should carefully read the instructions for the composition, since there are corresponding options for shoes made of textiles, rubber or leather. Universal adhesives can also be found on sale, the manufacturers of which assure that they are suitable for materials of a very different nature, but their actual effectiveness leaves much to be desired.
Be sure to pay attention to the overall durability of the composition, because not every adhesive is able to withstand moisture, high or low temperatures, their differences. When choosing an adhesive, the determining factor is its composition.
Nairite glue is not characterized by high durability, so it is most suitable for gluing felt insoles. However, it is often used for materials such as rubber. It perfectly withstands low temperatures, is not sensitive to moisture. It is not recommended to use these compounds on polyurethane, because the connection will turn out to be rather weak.
Professional shoe repairers use adhesives based on polyurethane. This product interacts well with any kind of materials. However, when solidified, the composition increases in volume. Glue sets within seconds, so it must be used as carefully as possible. PVC adhesive contains natural or artificial resin, which gives it excellent elasticity even after hardening. This feature allows the product to be used in areas with strong bends. There are certain requirements for applying glue layers — if they are neglected, the quality of fixing the elements will be much better.
When we selected products to include in our ranking of the best adhesives for shoes, we took into account all the factors discussed above. However, two points were also taken into account — user reviews and value for money. Too expensive products were not included in the review, so that each of our readers could choose the optimal composition for themselves, both in terms of cost and durability.
Top Ten Reliable Shoe Adhesives
This composition first appeared on the domestic market more than 19 years ago. Due to its excellent performance and reasonable cost, today it is one of the most popular among domestic consumers. In the line of adhesives for shoes, you can also find contact compounds, products containing epoxy resin.
Glue is perfect for working with materials such as leather, rubber, porcelain, ceramics, wood and so on. With it, you can repair almost any shoe. Products easily penetrate deep into the structure of the material, completely filling all the gaps, pores and cracks. It is very easy to use glue — you just need to follow the instructions on the package.
- One of the cheapest in the domestic market;
- Works great with a variety of materials;
- Penetrates deep into the structure of the product, providing a reliable connection;
- It is very easy for them to work.
- There is a strong foreign smell, so the composition must be used outdoors or in a well-ventilated area.
This glue was developed by Taiwanese specialists, it is produced there. Fully corresponds to the characteristics that the manufacturer gave him. The composition is able to tightly seal side or corner cuts, to get rid of breaks in the folds. It fits well on any material and stays on it for a very long time, preventing repeated damage in the same area.
The product is an ideal moisture-resistant composition, easily withstands even the negative effects of sunlight — it does not begin to melt or flow. Due to its excellent performance properties, it is able to cope even with oblique cuts. After complete drying, the place that was treated with this glue takes on its original appearance, making the defect that was there completely invisible. Product consumption is minimal, and the price is quite affordable.
- Designed exclusively to work with shoes, and it does not matter at all what material it was made of;
- Withstands all weather conditions;
- Able to cope even with very serious damage;
- Insignificant consumption of products;
- Acceptable cost.
- Not all users are familiar with the positive qualities of this brand.
Despite the fact that all the information on the packaging with this glue is indicated exclusively in Russian, the composition is made in Chinese factories. The required parts of the products seize with each other almost instantly. After complete drying, the glue leaves no stains at all, by the way, it also dries quite quickly. It is recommended for use even by experienced shoe repairers. As soon as the glue has completely hardened, the shoes can be used regardless of the environmental conditions, and there is no need to be afraid of new damage.
The product resists well to alkalis, fats and moisture. Polyurethane-based glue is produced, acetone, methyl ethyl ketone and some other additives are also added to it. The consistency is more like a gel, the color is transparent. Supplied in small tubes. Sticks the sole for a rather long time, can be used for other purposes.
- Produced on the basis of polyurethane;
- It tolerates even aggressive operating conditions;
- Acceptable cost;
- Convenient to use;
- All necessary information is given on the package.
- Decent expense;
- There is a fairly strong characteristic odor.
7. Moment Marathon
The glue was developed by specialists from the German chemical industry, but it is produced at Irish enterprises. Its formula was specially developed to work with shoes. The products have a number of undeniable advantages — the glue effectively holds the elements to be joined, its consumption is minimal, and besides, it is very convenient to use. The gluing process itself takes a matter of seconds, so you can save a decent amount of time on repairing shoes. The tube contains only 3 grams of the composition, but they last for a long time.
The adhesive is insensitive to moisture, characterized by high elasticity and excellent strength. The consistency is like a gel, the composition is not fluid. The tip of the tube is thin, so the glue can be dosed even on small areas. The product can be used to repair other leather products.
- Small consumption of products;
- High operational qualities;
- Quite convenient to use;
- Grabs within a short time.
- Does not tolerate extremely high temperatures very well;
- Has a specific smell.
Clay Moment Marathon
6. Done Deal
Made in the USA, can be used with almost any material. The glue is suitable for repairing air mattresses, boats, and other tourist equipment, although its main purpose is to repair shoes. They can glue rubber to metal, leather to glass, and even plastic to wood. The composition calmly tolerates even sharp temperature changes, retains its qualities in the range from -45 to +105 degrees.
The film turns out to be airtight regardless of whether you are working with the sole or the upper part of the boot. Glue is applied immediately to both surfaces: this allows it to grab quite tightly, it is advisable to apply it in a very thin layer. Dries within days of application. To make the connection even more durable, you can heat the glue to 70-80 degrees.
- Suitable not only for shoes, but also for other products from a wide variety of materials;
- Insignificant consumption of products;
- Convenient packaging.
- Very pungent smell.
5. UHU SCHUH & LEDER
A very reliable product that can be used for both hard and soft materials. Once applied, it dries in record time. Glue perfectly tolerates even prolonged exposure to water. If moisture gets on it, then it does not start to get wet, but, on the contrary, retains its basic operational qualities. It can be used not only for shoes, but also for other everyday items. During the entire period of operation, it does not dry out, it is securely held on the base, it can withstand temperatures up to +125 degrees.
Before gluing shoes thoroughly washed and dried. If necessary, you will have to apply several layers at once, but before applying the next one, it is necessary that the previous one is completely dry. Leaves no marks on shoes.
- Does not get wet under the influence of water;
- Withstands high temperatures — up to +125 degrees;
- Provides water resistance;
- Leaves no residue after drying.
- The ergonomics of the tube are not well thought out;
- There is a very strong odor.
Glue UHU SCHUH & LEDER
Users praise this composition for its high quality and excellent reliability. The formula is based on polyurethane resins. Due to this, it almost instantly connects the surfaces of a wide variety of materials (including dissimilar ones) and holds them for a long period of time. This composition is allowed to be used even on hard parts of shoes, it is also used to seal the sole or upper part of the boot or shoe. It is permissible to glue elements made of plastic, metals and glass. After drying, it becomes completely water-repellent, without losing its plasticity.
The product should be prepared before starting work: remove all contaminants, old glue, if any, the required surface area is degreased. Apply the composition only in a very thin layer and wait about 10 minutes until it dries completely. If necessary, this procedure will need to be repeated. You don’t have to squeeze the elements too much to each other — just enough to connect them tightly.
- Works great with any shoes — summer, winter, demi-season;
- Seizes very quickly;
- Suitable for metal, glass and other materials.
- It has a very unpleasant odor.
3. Nairit 1 (88-P1)
In third place in our ranking of the best adhesives for shoes was high-quality and durable domestic products. The composition turned out to be more than effective for the developers — it is suitable for a number of materials, so it is used in various household areas. The final strength of the connection directly depends on the observance of the technology when working with glue and the specific features of the material on which the glue layer is applied.
The result is an adhesive joint that has a number of important characteristics: it is elastic, durable, and is not afraid of the negative effects of ultraviolet rays and moisture. The composition is suitable even for processing large areas, because the adhesive will remain sticky for quite a long time after being applied to the base. It is absolutely safe to work with the product.
- Can work with fabric, wood, leather, rubber and other materials;
- It is allowed to glue using the so-called hot technology;
- Perfect for when you need to cover a large area.
- Too big container with glue.
Clay Nairit 1 (88-P1)
2. Polyurethane Seam Grip
Another versatile compound that can be used to work with rubber, leather, fiberglass. It dries quickly enough, a film is formed on the surface of the adhesive layer, which is insensitive to atmospheric air, moisture, and ultraviolet rays. To ensure uniform application of the composition, use a brush. The glued elements must be left to dry for a period of 12 hours or more.
With the help of such glue, it will be possible to significantly extend the period of operation of even a heavily worn out sole. Products are able to withstand even heavy rain or snow.
- After drying, does not lose elasticity;
- Dries quickly;
- Easily tolerates moisture, temperature changes.
- Not too comfortable to apply;
- Pretty high price.
Adhesive Polyurethane Seam Grip
1. KENDA Farben SAR 30E
Italian chemists have managed to get the best shoe glue in the world. It is worth noting that it is used not only for repairs, but also in the industrial manufacture of boots, shoes, and so on. It is mainly used for gluing elements made of leather, as well as for gluing such parts to other materials. Works well with wood, glass and other surfaces. There is no need to fix the elements for too long — in just a couple of minutes the necessary parts will fit snugly against each other. It is necessary to work with such glue at a temperature of +17 degrees.
Before use, the surfaces are thoroughly washed, dried and degreased. For the best effect, two or three layers of the composition are applied with a break of 10 minutes. If necessary, shoes can be heated to 90 degrees — this will help the glue dry in just 4 hours.
- Resistant to high and low temperatures;
- Can be completely dried in just 4 hours;
- There is no pronounced smell here;
- Good resistance to moisture.
- Except for the high cost is not found.
Adhesive KENDA Farben SAR 30E
In conclusion, a useful video
Our ranking of the best adhesives for shoes is coming to an end. We have told you in detail about the most famous products. If certain questions still remain, then you can always ask them in the comments to this article. We will try to answer them as soon as possible.